Outputs

The CDT impacts on industry, academia and society through a number of routes. In addition to the academic journal and conference publications listed below, our students have presented a further 130 posters and talks at national and international conferences, visited research organisations around the world from Mexico to China and Australia and spent time on-site with their industrial collaborators.

A full list of our students' journal and conference publications can be found below with links to the article where available. CDT student names are highlighted in bold. You can also find CDT publications on our google scholar page.

2016 - Journal Publications

1.            Benson LL, Mellor I, Jackson M. Direct reduction of synthetic rutile using the FFC process to produce low-cost novel titanium alloys. Journal of Materials Science. 2016;51(9):4250-61. Link

2.            Hernández-Nava E, Smith CJ, Derguti F, Tammas-Williams S, Leonard F, Withers PJ, et al. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting. Acta Materialia. 2016;108:279-92. Link

3.            Hulme H, Baxter F, Babu RP, Denecke MA, Gass M, Steuwer A, et al. An X-ray absorption near-edge structure (XANES) study of the Sn L3 edge in zirconium alloy oxide films formed during autoclave corrosion. Corrosion Science. 2016:202-8. Link

4.            Mackie AJ, Hatton GD, Hamilton HGC, Dean JS, Goodall R. Carbon uptake and distribution in Spark Plasma Sintering (SPS) processed Sm(Co, Fe, Cu, Zr)(z). Materials Letters. 2016;171:14-7. Link

5.            Murphy M, Walczak MS, Hussain H, Acres MJ, Muryn CA, Thomas AG, et al. An ex situ study of the adsorption of calcium phosphate from solution onto TiO2(110) and Al2O3(0001). Surface Science. 2016;646:146-53. Link

6.            Rodgers BI, Prangnell PB. Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195. Acta Materialia. 2016;108:55-67. Link

7.            Smith CJ, Derguti F, Nava EH, Thomas M, Tammas-Williams S, Culizia S, et al. Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. Journal of Materials Processing Technology. 2016;229:128-38. Link

8.            Smith CJ, Gilbert M, Todd I, Derguti F. Application of layout optimization to the design of additively manufactured metallic components. Structural and Multidisciplinary Optimization. 2016:1-17. Link

9.            Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2016:1-8. Link

10.          Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components. Scripta Materialia. 2016;122:72-6.

11.          Howson MP, Wynne BP, Mercado-Solis RD, Leduc-Lezama LA, Jonny J, Shaji S. An Analysis of the Quenching Performance of a Copper Nanofluid Prepared Using Laser Ablation. Journal of Thermal Science and Engineering Applications. 2016;8(4):044501-044501. Link

12.          Chohan UK, Jimenez-Melero E, Koehler SPK. Surface atomic relaxation and magnetism on hydrogen-adsorbed Fe(110) surfaces from first principles. Applied Surface Science. 2016;387:385-92. Link

13.          Amendola A, Smith CJ, Goodall R, Auricchio F, Feo L, Benzoni G, et al. Experimental response of additively manufactured metallic pentamode materials confined between stiffening plates. Composite Structures. 2016;142:254-62. Link

2016 - Conference Publications

1.            Pollard JD, Rahimi S, Watford A, Jackson M, Wynne BP. The Determination of Residual Stress in Extruded Ti-6Al-4V by Contour Method and Finite Element Analysis.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 305-10. Link

2.            Rakshe B, Patel J, Palmiere EJ. Softening Kinetics of Plain Carbon Steels Containing Dilute Nb Additions.  THERMEC'2016 International Conference on Processing & Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications; May 29 - June 3, 2016; Graz, Austria2016.

3.            Awang Draup AJ, Robson J, Lunt MJ. Development and Application of a Coupled Microstructure - Finite Element Model to Predict Performance of 2139-T8 Aluminium Alloy Friction Stir Welded Panels in Blast.  NATO conference - Specialists Meeting on "Design, Manufacturing and Application of Metallic Lightweight Material Components for Military Vehicles" (AVT-264); April 25, 2016 to Wednesday, April 27, 2016; Tallinn, ESTONIA2016.

4.            Benson LL, Mellor I, Jackson M. Solid State Extraction and Consolidation of Titanium Alloys Direct from Synthetic Rutile.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 71-6. Link

5.            Fixter J, Gu J, Ding J, Williams ST, Prangnell P. Preliminary Investigation into the Suitability of 2xxx Alloys for Wire‚ÄĎArc Additive Manufacturing.  ICAA15, 15th International Conference on Aluminium Alloys; June 12-16, 2016; Chongqing, China2016.

6.            Garner A, Baxter F, Frankel P, Topping M, Harte A, Slater T, et al. Investigating the Effect of Zirconium Oxide Microstructure on Corrosion Performance: A Comparison Between Neutron, Proton and Non-Irradiated Oxides.  18th International Symposium on Zirconium in the Nuclear Industry, Sponsored by ASTM Committee B10 on Reactive and Refractory Metals and Alloys; May 15-19, 2016; The Westin Hilton Head Island Resort & Spa Hilton Head Island, SC, USA: ASTM; 2016.

7.            Howson M, Wynne BP, Davies PS, Al-Bermani S, Talamantes-Silva J. A Comparison of Input Data Used to Represent Phase transformations During the Quenching of a Large Nuclear forging.  Metal Forming 2016 - 16th International Conference Metal Forming; September 18 - 21, 2016; Kraków, Poland2016.

8.            Hu J, Setiadinata B, Aarholt T, Vilalta-Clemente A, Wilkinson A, Moody M, et al. High-Resolution Characterization of Zr Nuclear Fuel Cladding Alloys.  18th International Symposium on Zirconium in the Nuclear Industry, Sponsored by ASTM Committee B10 on Reactive and Refractory Metals and Alloys; May 15-19, 2016; The Westin Hilton Head Island Resort & Spa Hilton Head Island, SC, USA: ASTM; 2016.

9.          Leonard F, Tammas-Williams S, Todd I. CT for Additive Manufacturing Process Characterisation: Assessment of melt strategies on defect population.  6th Conference on Industrial Computed Tomography, (iCT 2016); 9-12 February, 2016; Wels, Austria2016. Link

10.          Lunt D, Fonseca JQd, Rugg D, Preuss M. Slip Band Characterisation in Ti-6Al-4V with Varying Degrees of Macrozones.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 1129-34. Link

11.          Pennington J, Wynne BP, Byrne G. Constitutive Equation Development to Model the Hot Forging of ZERON®100 Super Duplex Stainless Steel and Associated Microstructural Evolution.  Metal Forming 2016 - 16th International Conference Metal Forming; September 18 - 21, 2016; Kraków, Poland2016.

12.          Rodgers BI, Prangnell P. The Influence of Extended and Variable Local Stretching on the Strength of AA2195 Alloy Taper Rolled Plates.  ICAA15, 15th International Conference on Aluminium Alloys; June 12-16, 2016; Chongqing, China2016.

13.          Tammas-Williams S, Donoghue J, Withers PJ, Todd I, Prangnell P. Predicting the Influence of Porosity on the Fatigue Performance of Titanium Components Manufactured by Selective Electron Beam Melting.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 1447-52. Link

14.          Thomas B, Derguti F, Jackson M. Continuous Extrusion of Titanium Particulates.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 107-15. Link

15.          Topping M, Harte A, Frankel P, Preuss M, Sundell M, Thuvander M, et al. The Effect of Iron on Dislocation Evolution in Model and Commercial Zirconium Alloys.  18th International Symposium on Zirconium in the Nuclear Industry, Sponsored by ASTM Committee B10 on Reactive and Refractory Metals and Alloys; May 15-19, 2016; The Westin Hilton Head Island Resort & Spa Hilton Head Island, SC, USA: ASTM; 2016.

16.          Violatos I, Thomas M, Castle JB, Wynne BP. Sub-Surface Plastic and Elastic Strain Fields and Fatigue Performance Of Drilled Titanium Plates.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 1035-40. Link

17.          Weston N, Derguti F, Jackson M. Exploitation of Spark Plasma Sintering and One-Step Forging for Cost-Effective Processing of Titanium Alloy Powders.  Proceedings of the 13th World Conference on Titanium: John Wiley & Sons, Inc.; 2016. p. 123-8. Link

 

2015 - Journal Publications

1.            Ahmed MHM, Torrelles X, Treacy JPW, Hussain H, Nicklin C, Wincott PL, et al. Geometry of α-Cr2O3(0001) as a Function of H2O Partial Pressure. The Journal of Physical Chemistry C. 2015;119(37):21426-33. Link

2.            Bull L, Palmiere EJ, Thackray RP, Burgess IW, Davison B. Tensile Behaviour of Galvanised Grade 8.8 Bolt Assemblies in Fire. Journal of Structural Fire Engineering. 2015;6(3):197-212. Link

3.            Francis EM, Harte A, Frankel P, Haigh SJ, Jädernäs D, Romero J, et al. Erratum: Iron redistribution in a zirconium alloy after neutron and proton irradiation studied by energy-dispersive X-ray spectroscopy using an aberration-corrected (scanning) transmission electron microscope (J. Nucl. Mater. (2014) 454:1-3 (387-397) DOI: 10.1016/j.jnucmat.2014.08.034). Journal of Nuclear Materials. 2015;467:395-6. Link

4.            Frankel G, Mauzeroll J, Thornton G, Bluhm H, Morrison J, Maurice V, et al. Corrosion scales and passive films: general discussion. Faraday Discussions. 2015;180(0):205-32. Link

5.            Garner A, Hu J, Harte A, Frankel P, Grovenor C, Lozano-Perez S, et al. The effect of Sn concentration on oxide texture and microstructure formation in zirconium alloys. Acta Materialia. 2015;99:259-72. Link

6.            Griffiths D. Explaining texture weakening and improved formability in magnesium rare earth alloys. Materials Science and Technology. 2015;31(1):10-24. Link

7.            Harte A, Seymour T, Francis EM, Frankel P, Thompson SP, Jadernas D, et al. Advances in synchrotron x-ray diffraction and transmission electron microscopy techniques for the investigation of microstructure evolution in proton- and neutron-irradiated zirconium alloys. Journal of Materials Research. 2015;30(9):1349-65. Link

8.            Hernandez-Nava E, Smith CJ, Derguti F, Tammas-Williams S, Leonard F, Withers PJ, et al. The effect of density and feature size on mechanical properties of isostructural metaffic foams produced by additive manufacturing. Acta Materialia. 2015;85:387-95. Link

9.            Hu J, Garner A, Ni N, Gholinia A, Nicholls RJ, Lozano-Perez S, et al. Identifying suboxide grains at the metal-oxide interface of a corroded Zr-1.0%Nb alloy using (S)TEM, transmission-EBSD and EELS. Micron. 2015;69:35-42. Link

10.          Pollard JD, Watford A, Jackson M, Wynne BP. The modelling of ring tests at elevated temperatures for the determination of friction in Ti-6A1-4V forgings. Computer Methods in Materials Science. 2015;15(1):150-5. Link

11.          Robson JD, Haigh SJ, Davis B, Griffiths D. Grain Boundary Segregation of Rare-Earth Elements in Magnesium Alloys. Metallurgical and Materials Transactions A. 2015;47(1):522-30. Link

12.          Tammas-Williams S, Zhao H, Leonard F, Derguti F, Todd I, Prangnell PB. XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by Selective Electron Beam Melting. Materials Characterization. 2015;102:47-61. Link

13.          Weston NS, Derguti F, Tudball A, Jackson M. Spark plasma sintering of commercial and development titanium alloy powders. Journal of Materials Science. 2015;50(14):4860-78. Link

14.          Wu H, Chen YC, Strong D, Prangnell P. Stationary shoulder FSW for joining high strength aluminum alloys. Journal of Materials Processing Technology. 2015;221:187-96. Link

15.          Yang Y, Joshi GR, Akid R. Electrochemical Investigation of the Corrosion of Different Microstructural Phases of X65 Pipeline Steel under Saturated Carbon Dioxide Conditions. Materials. 2015;8(5). Link

2015 - Conference Publications

1.            Brownsmith T, Robson J, Turski M, Beer A. The Influence of Extrusion Conditions on the Microstructure and Texture of a Mg-4Y-3RE Alloy.  10th International Conference on Magnesium Alloys and Their Applications (Mg 2015); October 11 to 16 2015; Jeju, Korea.2015.

2.            Calvert E, Pollard J, Jackson M, Wynne B, Thackray R. Determining a flow stress model for high temperature deformation of Ti-6Al-4V. Materials Science Forum2015. p. 441-6. Link

3.            Chan CM, Engelberg DL, Walters WS. Performance Characterisation of AGR Fuel Cladding Relevant to Long-term in-Pond Storage in pH-moderated Aqueous Environment.  Reactor Fuel Performance - TopFuel 2015 Proceedings - Part II: Reactor Fuel Performance - TopFuel 2015; 13 Sep 2015-17 Sep 2015; Zurich, Switzerland.2015. p. 120-9. Link

4.            Fernández-Domene RM, Leiva-García R, Andrews J, Akid R. Galvanic Corrosion Following Local Breakdown of a Scale Formed on X-65 in CO2 Saturated Solutions.  NACE CORROSION 2015 Conference & Expo; 2015/5/12/; Dallas, TX, United States. NACE: NACE International; 2015.

5.            Hu J, Setiadinata  B, Aarholt T, Bagot P, Moody M, Lozano-Perez S, et al. High-resolution characterization of corrosion and hydrogen pickup of Zr cladding alloys.  TOPFUEL 2015; 13-17 September, 2015; Zurich Switzerland 2015.

6.            Joshi GR, Cooper K, Lapinski J, Engelberg DL, Bikondoa O, Dowsett MG, et al. In Situ Grazing Incidence X-ray Diffraction of Sweet Corrosion Scaling on Carbon Steel.  NACE CORROSION 2015 Conference & Expo; 15-19 March, 2015; Dallas, TX, United States. NACE: NACE International; 2015.

7.            Mukahiwa K, Scenini F, Burke MG, Duff J, Platts N, Tice DR, et al. Microstructural Characterisation of Type 316 Austenitic Stainless Steels: Implications for Corrosion Fatigue Behaviour in PWR Primary Coolant.  17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems; 9-13 Aug 2015; Ottawa, Canada 2015.

8.            Pollard JD, Watford A, Jackson M, Wynne BP. The modelling of ring tests at elevated temperatures for the determination of friction in Ti-6A1-4V forgings.  KOMPLASTECH 2015 - XXII Conference Computer Methods in Materials Technology; January 11-14, 2015; Krynica-Zdrój, Poland 2015.

9.            Zhao H, Antonysamy AA, Meyer J, Ciuca O, Williams ST, Prangnell P. Automated Multi-Scale Microstructure Heterogeneity Analysis of Selective Electron Beam Melted TiAl6V4 Components.  Additive manufacturing and joining processes’ symposia,TMS, in TMS 2015 Supplemental Proceedings; 15-19 Mar 2015; Orlando, US: The Minerals, Metals & Materials Society (TMS), John Wiley & Sons; 2015. p. 429-36.

2014 and older - Journal Publications

1.            Ahmed MHM, Lydiatt FP, Chekulaev D, Wincott PL, Vaughan DJ, Jang JH, et al. Wet chemically prepared rutile TiO2(110) and TiO2(011): Substrate preparation for surface studies under non-UHV conditions. Surface Science. 2014;630:41-5. Link

2.            Cassell A, Thompson GE, Zhou X, Afseth A, Dunlop H, Kulas MA, et al. Microstructure and corrosion behaviour of low copper 7xxx aluminium alloy. Surface and Interface Analysis. 2013;45(10):1604-9. Link

3.            Francis EM, Harte A, Frankel P, Haigh SJ, Jadernas D, Romero J, et al. Iron redistribution in a zirconium alloy after neutron and proton irradiation studied by energy-dispersive X-ray spectroscopy (EDX) using an aberration-corrected (scanning) transmission electron microscope. Journal of Nuclear Materials. 2014;454(1-3):387-97. Link

4.            Garner A, Gholinia A, Frankel P, Gass M, MacLaren I, Preuss M. The microstructure and microtexture of zirconium oxide films studied by transmission electron backscatter diffraction and automated crystal orientation mapping with transmission electron microscopy. Acta Materialia. 2014;80:159-71. Link

5.            Garner A, Preuss M, Frankel P. A method for accurate texture determination of thin oxide films by glancing-angle laboratory X-ray diffraction. Journal of Applied Crystallography. 2014;47:575-83. Link

2014 and older - Conference Publications

1.            Barnes PE, Lyon SB, Engelberg DL. In-situ Surface Strain Mapping of Pitting Corrosion in a High Strength Carbon Steel.  EUROCORR 2014, The Annual Congress of the European Federation of Corrosion; 8-12 Sept 2014; Pisa, Italy 2014.

2.            Watson R, Preuss M, da Fonseca JQ, Witulski T, Terlinde G. The Effect of Strain and Temperature Profiles on Static Recrystallization during Solution Heat Treatment After Hot Deformation of Alloy 718.  8th International Symposium on Superalloy 718 and Derivatives: John Wiley & Sons, Inc.; 2014. p. 873-84. Link

3.            Watson R, Preuss M, Quinta da Fonseca J, Witulski T, Terlinde G, Büscher M. Characterization of abnormal grain coarsening in Alloy 718.  MATEC Web of Conferences 14 - EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications; May 12–16, 2014; Giens, France 2014. Link

4.            Wu H, Chen YC, Prangnell P. Analysis of the Advantages of Stationary Shoulder Friction Stir Welding in Near-net Shape Joining High Strength Aerospace Aluminium Alloy AA7050-T7651.  14th Int Friction Stir Welding Symposium, Beijing China, TWI (2014) (On CD); Beijing, China 2014. Link

5.            Wu H, Chen YC, Strong D, Prangnell P. Systematic Evaluation of the Advantages of Static Shoulder FSW for Joining Aluminium. In: Knut Marthinsen BHaYL, editor. Materials Science Forum2014. p. 407-12. Link

6.            Yang Y, Joshi GR, Wilkins CP, Harrison G, Lindsay R, Akid R. Electrochemical investigation of the corrosion of different microstructural phases of X-65 pipeline steel under saturated carbon dioxide conditions.  NACE CORROSION 2014 Conference & Expo; 9-14 September 2014; San Antonio, TX, United States. NACE: NACE International; 2014.

7.            Awang Draup AJ, Robson J, Prangnell P, Li QM, Lunt MJ. Modelling of blast performance of welded aluminium structures in military vehicles manufactured by friction stir welding.  Euro LightMAT 2013, International Congress and Exhibition on Light Materials – Aluminium, Magnesium, Titanium and their Alloys;; 3. – 5. September 2013; Bremen, Germany2013.

8.            Barnes PE, Lyon SB, McLaughlin T, Engelberg DL. Corrosion Fatigue Cracking of High Strength Carbon Steel Wires in CO2 Saturated Seawater Environment.  EUROCORR 2013, The Annual Congress of the European Federation of Corrosion; 1 - 5 September 2013; Estoril, Portugal2013.

9.            Bertali G, Scenini F, Lindsay J, Winiarski B, Zhong X, Burke MG. Oxidation studies of alloy 600 in Low Pressure Hydrogenated Steam.  16th International Conference on Environmental Degration in Nuclear Power Systems - Water Reactors; 11-15 August, 2013; Asheville, North Carolina, USA2013.

10.          Cassell A, Thompson GE, Zhou X, Hashimoto T, Scamans G. Relating grain misorientation to the corrosion behaviour of low copper 7xxx aluminium alloys. Materials Science Forum2013. p. 623-8.

11.          Dwyer L, Robson J, da Fonseca JQ, Kamp N, Hashimoto T, Thompson GE. Constituent Particles and Dispersoids in an Al-Mn-Fe-Si Alloy Studied in Three-Dimensions by Serial Sectioning. Materials Science Forum. 2013;765:451-5.

12.          Harris JM, Zhou XR, Thompson GE, Scott P, Zhang XY, Shi ZC, et al. Novel Environmentally-Friendly Coatings for Aerospace Alloys. Materials Science Forum. 2013;765:693-7.

13.          Johnson L, Palmiere E, Thackray R, Burgess I, Davison B. Behaviour of axially loaded structural bolting assemblies in fire.  Applications of Structural Fire Engineering (ASFE); April 19-20 2013; Prague, Czech Republic2013. Link

14.          Lindsay J, Scenini F, Zhou X, Bertali G, Cottis RA, Burke MG, et al. Characterisation of Stress Corrosion Cracking and Internal Oxidation of Alloy 600 in High Temperature Hydrogenated Steam.  16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems (Water Reactors); August 2013; Asheville, NC, USA2013.

15.          Nolan RA, Kulas MA, Prangnell PB, Da Fonseca JQ, editors. The effect of temperature on the formability of a high strength aluminium automotive alloy. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; 2013.

16.          Smith CJ, Todd I, Gilbert M, editors. Utilizing additive manufacturing techniques to fabricate weight optimized components designed using structural optimization methods. 24th International SFF Symposium - An Additive Manufacturing Conference, SFF 2013; 2013; Texas, USA. Link

17.          Wu H, Chen YC, Strong D, Prangnell P. Assessment of the Advantages of Static Shoulder FSW for Joining Aluminium Aerospace Alloys. Materials Science Forum. 2013;783-786:1770-5.

18.          Cassell A, Thompson GE, Zhou X, Afseth A, Dunlop H, Kulas M-A, et al. Microstructure and corrosion behaviour of cold rolled lean 7xxx aluminium alloys.  VI International Symposium on Aluminium Surface Science and Technology; May 27-31, 2012; Sorrento, Italy2012.

19.          Griffiths D, Davis B, Robson J. Forming Limit Diagrams for Mg Alloy ZEK100 in Different Microstructural Conditions.  9th International Conference on Magnesium Alloys and Their Applications; July 8-12, 2012,; Vancouver, BC, Canada2012.

20.          Leonard F, Tammas-Williams S, Prangnell P, Todd I, Withers P. Assessment by X-ray CT of the effects of geometry and build direction on defects in titanium ALM parts.  Upper Austrian University of Applied Sciences Wels Campus, Conference on Industrial Computed Tomography (ICT 2012); 19-21 September, 2012; Wels, Austria 2012. Link

21.          Martin JP, Stanhope C, Gascoyne S. Novel Techniques for Corner Joints Using Friction Stir Welding.  Friction Stir Welding and Processing VI: John Wiley & Sons, Inc.; 2011. p. 177-86. Link